TM510 High Voltage EMC Surge Generator
Rated capacitance: 2μF
Work mode: DC/single pulse/ periodic pulse
Discharging cycle: 6s (when work mode is periodic pulse)
Impact energy: 900J (when pulse work mode is 30KV)
Inquiry Now
Introduction
TM510 Surge Generator is mainly used for testing power cable high-resistance and arc-over fault whose grade range is 0-10kV, co-operating with cable fault tester and locating devices to test and locate faults. If the user choose the professional digital milli-ampere-meter, as for cable with grade range about 0- 6kV, the instrument can also be used to do DC&voltage resistance test and current leakage test after the fault is repaired. The instrument is internally equipped with voltage-rise rectifying and discharging device, has complete functions, and is also convenient and safe to be wired and operated.
Specification
| Output voltage | 0-30kv, DC&Negative polarity, continuously tuneable |
| Rated capacitance | 2μF |
| Work mode | DC/single pulse/ periodic pulse |
| Discharging cycle | 6s (when work mode is periodic pulse) |
| Impact energy | 900J (when pulse work mode is 30KV) |
| Discharging device | Yes |
| Power supply | AC&single phase 220V±10%, frequency 50Hz±1Hz |
| Altitude above sea level | lower than 1000m |
| Temperature range | 0-40 degree |
| Relative humidity | no more than 70% (when temperature is 40 degree) |
| Main engine’s volume | 450*370*500(W*D*H,mm) |
| Main engine’s weight | 40kg |
| Capacitance prefatory remarks | 370*140*500(W*D*H,mm) |
| Capacitance weight | 10kg |
