TM-OFI-401L Live Fiber Identifier


Support to detect optical signals without disrupting traffic;

Based on non-destructive technology;

Indicate the signal direction in fiber;

Detect a variety of optical tones, 270Hz, 1kHz and 2kHz;

Inquiry Now
TM-OFI 401L Optical Fiber Identifier
TM-OFI 401L Optical Fiber Identifier Suitable for 0.25mm, 0.9mm, 3.0mm fiber, and no need to replace the clamp block, more convenient than others 

---Macro bending measurement. Macro bends are the use of fiber-optic bending leak out when the weak optical signal, optical signal to detect the direction and intensity. Does not damage optical fiber, without interrupting communications, and direct detection of 25mm bare fiber, 0.9mm and 2.5mm fiber casing tight jumper.
---Tone identification, Optical Fiber Identifier can detect optical signals in the tone signal a fixed load, 270Hz, 1KHz and 2KHz, to identify a specific optical fiber, can quickly find the necessary fiber.
---Build in VFL function.The output power of Optical Fiber Identifier is 10 mW.(Optional function)
---Low battery monitoring function, when battery power is insufficient , the Low battery LED will remind users to change batteries.

Wave respond 800nm-1700nm
Pass through insertion loss
1.  250umOptical fiber
2.  900umOptical fiber
3.  3mmOptical fiber
1. 1.0dB
2. 1.0dB
3. 2.0dB
Application of optical fiber 250um/900um/2.5um/3mm Optical fiber
Identified Signal Type 270HZ/1KHZ/2KHZ
Identification of modulated signals Yes
Power Measurement Yes
Display LED segment
Tone Yes
Low power monitoring Yes
Detector type 1mm InGaAs
Minimum detection power 
Test conditions:
   250umOptical fiber
   900umOptical fiber
   3mmOptical fiber
Test conditions:
250umOptical fiber
900umOptical fiber
3mmOptical fiber
Specifications of VFL (Optional)
Wavelength:       650nm±10nm
Output Power:    10 mW
Fiber Port:    FC/PC
Power supply:        2*AA  1.5V Alkaline Battery
Operation Temperature:   -10℃  to  +50℃
Storage Temperature:    -20℃  to  +70℃
Outline size 230*43*36mm
weight  200g