Widely used in the aloft work of telecommunication projects without climbing
Automatic strapping
Wireless remote control
Insulation high voltage (10kv)
Strapping time: 0.8 seconds/time
Working range: 5-58mm
Battery: 6600mAh ( can work 1500times under fully charged)
Charging time: 1.5 hours
Voltage: 12.8V
Operation Cautions:
1. Please wear a safety helmet before using
2. Please put the iron wires into the grooves
3. Press the wireless controller, the binding machine can strap and also cut automatically
4. Please swich off the machine when there’s noise “ di di di...’ and check whether there’s some unknow things in the cutting port
5. The charging time is 1.5 hours, please do not over-charged
Notice :
When there’s only 1 meter iron wires left in the grooves, please make sure to pull out the wires along with the roll
If the the power of the battery is low, the machine may not bind the cables tightly, please check the batteries firstly;
And during the operation, do not touch the access way of the wires in order to avoid the personal injury